(2005-2023) Tacoma 2TR 2.7L Runner Kit

Toyota 2TR (2.7Liter VVTI) inline 4-cylinder engine now has the option for an Intake Manifold Spacer Kit offered by Anderson Engine Solutions. This Toyota Tacoma intake manifold runner is an aftermarket "bolt-on" item without any modification to the engine. Reference Dyno Sheet performance increases between 2800 - 3100 RPM compared to stock (Torque increase of + 10 Ft.lbs and HP increase of +6 Hp ).

Features:

• Direct fit to OEM air box/plenum or compatible to aftermarket cold air intake system.
• CNC machined runner Delrin (POM-C) 2.00" thick with gasket groove (69.33 cc)
• OEM Toyota Intake Gaskets with the kit for proper sealing.
• 30 Count Additional Hardware
• 1/8" Steel Z-brackets formed by CNC hydraulic press (ASTM Spec. A-569)
• Z- bracket with corrosion resistant epoxy enamel coating.
• 1/4" T6061 Aluminum Brackets with tapped hole (8M x 1.25)
• 3/8" Hose ID x 3/8" Hose ID Black Hose Connector
• Additional length 3/8" ID PVC Hose.
• Additional length 3/4" ID Hose for positive crankcase ventilation.

What are the advantages of Delrin (POM-H)

• Temperature resistance (up to 250F max)
• Prevents excessive heat transfer
• High Material Stiffness
• Low Friction & Wear
• Fatigue Resistant
• Chemical Resistant
• Dimensional Stable
• Low moisture absorption

After installation, the additional length of the intake port air flow path allows for the 2TR engine to reach max torque at a lower engine speed. This decreases the need to operate the vehicle at higher RPMs to achieve a max engine performance and increases drivability of the truck overall while promoting better low end torque/mileage per gallon (MPG)

NOTE: This is not C.A.R.B. approved.

Contact our Tech Support Line for further information at 928-575-2174.