Magnaflow Exhaust System
(Street Series)
MagnaFlow's dedication to engineering and manufacturing the finest exhaust systems makes for a superior sound and driving experience. Constructed of premium materials and carefully designed for the best fitment and performance, you can have confidence in making the right choice for your vehicle.
Specifications:
- System Type: Cat-Back
- Series: Street
- Main Piping Diameter: 3"
- Exit Style: Single Passenger Side Rear
- Inlet Connection Type: Bolt-On
- Muffler Quantity: 1
- Muffler Type: Straight-Through
- Muffler Material: Stainless Steel
NOTE: Verify fitment before ordering.
Contact our Tech Support Line for further information at 928-575-2174.
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
To open a printable PDF version of this instruction
CLICK HERE
Installation Instructions:
Step 1: Begin removal of the OEM exhaust system by unbolting the two bolts attaching the exhaust to the catalytic converter. Do not discard or damage the OEM fasteners or rubber insulators as they will be used to install the new system.
Step 2: Disengage hangers from rubber insulators and remove the OEM exhaust.
Step 3: Begin installation of your new MAGNAFLOW system by attaching the Inlet Pipe Assembly to the catalytic converter outlet using the OEM fasteners and insulator. Keep all fasteners and clamps loose until final adjustment.
Step 4: Next use the supplied 2.50" clamp to attach the Muffler Assembly to the Inlet Pipe. Finish by attaching the Tailpipe Assembly to the Muffler Assembly with the Supplied 3.00" clamp and fitting the hangers into the insulators.
Step 4 Continued:
Step 5: Once a final position has been chosen for the new exhaust system, evenly tighten all clamps from front to rear using the torque specifications on page one of the instructions. Inspect all fasteners after 25-50 miles of operation and re-tighten if necessary.
