Pro Camshaft Kit

(w/ Chromoly Retainers)

When you step up to a Stage 2 or higher cam, the stock Toyota valve train is not designed to handle these high lift, high duration cams. The rocker arms will start to interfere with the retainers; the retainers will start running into the stock guides and so on. The result is a lot of broken parts. To eliminate this interference problem, LCE has engineered a valve train combination that allows for the high-performance cams without all the interference.

In comes the Pro Cam Kit. This kit has a custom spring that sports 100 lbs. of seat pressure. The kit also comes with Chromoly retainers for better durability while still being lighter than a stock retainer. The kit then includes a custom valve guide that has a shorter top to clear the retainer on high lift cams. The guide is then matched to a custom Viton valve seal set and is then finished off with hardened keepers and spring shims.

Kit Includes:

• (8) Pro Valve Guides
• (8) Pro Dual Valve Springs
• (8) Chromoly Retainers
• (8) Valve Spring Shims
• (8) Viton Valve Seals
• (16) Valve Keepers

NOTE: Valve Guides will need to be honed for proper valve stem clearances. (Intake .0015” - .0020”) (Exhaust .0020” - .0025”).

Contact our Tech Support Line for further information at 928-575-2174.