D.U.I. Distributor With Vacuum Advance 20R/22R
D.U.I. Distributor With Vacuum Advance 20R/22R
 
Our Price: $395.25
ATTENTION: NON RETURNABLE ITEM
Shipping Delay: Usually Ships in 6 to 8 Weeks

Quantity in Stock:2

Part Number: 1081043
Qty:

Details Fitment Instructions
 

D.U.I. Distributor

(w/ Vacuum Advance)

Performance Distributors one-piece ignition system, D.U.I. are three letters you cannot do without! The D.U.I. (Davis Unified Ignition) allows you to Drive Under the Influence of more power. The newest addition to the D.U.I. distributor lineup is now available From LC Engineering.

The D.U.I. features a high voltage coil and high dwell module, which is located inside the distributor. Only one 12-volt hot wire is needed to get your engine charged with a D.U.I. The high output coil and Dyna Mod module allow spark plug gaps to be opened up to (.055". The combination of the custom advance curve and the high output coil and module will give you instant throttle response, quicker starts, and more horsepower.

The D.U.I. is virtually waterproof making it ideal for off-road conditions. Since the electronic components are located inside the distributor, they are not exposed to the elements of off road conditions that will cause stock and other aftermarket ignition systems to fail. Each Performance Distributor is custom-tuned on a distributor machine with a super smooth advance curve. A custom advance curve insures maximum performance and mileage. Buying an "uncurved" distributor would be like buying an unground camshaft! No compromise curves...no guesswork for you. Just pure power from the world's leader in high-performance advance curves.

  • These distributors require 6-8 weeks as they are a custom application that is made to order
  • Will not work with stock spark plug wires. See Part# 4070151 for the correct wire set.
  • Non-returnable item. This is custom-order electronic item, absolutely no returns.
  • Please take note of the physical size of this distributor compared to the factory distributor. Make sure you have adequate clearance before ordering!



NOTE: Not for use in E.F.I. vehicles. This distributor is longer than stock, and will stick at least 12 inches out of the head. LC Engineering is not responsible for clearance issues. This model is compatible with power steering equipped vehicles. Vehicles without power steering, see Part #: 1081046.



Contact our Tech Support Line for further information at 928-575-2174.

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Nice May 2, 2022
Reviewer: Joshua Futch from Madison, GA United States  
Easy install shipping a little long but that t be excepted in this day and age

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easiest distributer install ever January 20, 2022
Reviewer: Jamie Mcginnis from Glide, OR United States  
I was hesitant to attempt to install this due to the lack of provided instructions but it turned out to be the simplest install I've ever  done. Just reuse the switched 12V ignition wire "brown in my case" from the stock coil hooked to the distributor labeled "battery", set timing and your good to go. Helped with some of the flat spots in my throttle and feels much more responsive over the stock coil setup. Worth the investment and gives plenty of room for upgrades down the road. Pairs well with a set of livewires.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfection July 30, 2020
Reviewer: Walter Miller from Cottondale, FL United States  
This distributor exceeded my expectations.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Beast of a distributor April 15, 2019
Reviewer: Bradley Goforth from Maryville , TN United States  
easy swap for the average mechanic if you know anything about a GM HEI distributor then it’s exactly like it and the instructions are for a GM as well. They provide OEM quality connectors for you to give it a factory look with your custom wiring. I am very happy with it

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 GREAT PRODUCT September 26, 2017
Reviewer: Joseph Ernst from Perryville, MO United States  
GUYS ARE VERY HELPFUL

Was this review helpful to you?