5/8" High Temperature Hose

(Order By The Foot)

LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 5/8" hose is perfect as an oil drain line for your turbocharger. Sold by the foot if you order 1 you will get one foot order 10 you will get 10 feet.

Specifications:

• High Performance Silicone Heater Hose
• Exterior Color: Blue
• Wall Thickness: .140/.170
• Continuous Operating Temp:-65oF to +350oF (-54oC to +177oC)
• Meets or exceeds operating requirements of SAE J20 R3
• Nylon fiber reinforced
• Resistant to coolant additives
• Resists hardening, cracking, cold leaks, aging, steam and many chemicals

Product Recommendations

• Use worm gear or constant torque type stainless steel clamps with inner liner
• Do not use serrated, slotted or wire type clamps
• Initial clamp torque should be 40 inch-lbs
• If re-torquing is required, it should be limited to 20 inch-lb

Contact our Tech Support Line for further information at 928-575-2174.