Intake Valve (Stock Length)

(Stainless Steel / 45.5mm)

In 2019 LC Engineering revised it's Stainless Steel Intake Valve and shortened it to match the OEM valve length measurement allowing us to cater to the home builder (rather than being forced to take it to a machine shop). As for the quality and the manufacturing process. no changes there, you still get the same exceptional performance you have grown used to. This stainless steel swirl polished valve is 1mm larger than stock 22R/RE/RET intake valves and will fit on the stock valve seat after the required valve job is performed. If you're building a 20R the valve is 2.5mm larger than stock and will require larger valve seats to work in the head. This intake valve is made from EV8 (21-4N) stainless steel for greater strength at higher temperatures. These valves are a perfect upgrade for a mildly built engine!

Features:

• Larger for more air flow
• Made from temperature resistant stainless steel
• Swirl-polished for max air flow
• Lighter than factory steel valves
• Hardened tips for longer valve life
• May be used with factory valve guides and seals
• Stock length

NOTE: Sold individually. If you only need to replace a single valve in your build and the build was assembled in 2018 or prior you will want to measure and verify the length of the valve in your build to ensure that the correct replacement will be ordered. The "Longer" of the two Intake Valve options if needed is HERE.

Other Recommended Parts:

• Exhaust Valve, see Part #:1023034
• 45.5mm Valve Seat, see Part #: 1023117
• Stage 2 Valve Kit - 20R, see Part #: 1021550
• Pro/Stage 2/Stage 3 Valve Kit - 22R/RE/RTE, see Part #: 1021557

Contact our Tech Support Line for further information at 928-575-2174.