8" Pinion & Transfer Case Flange Nut
The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges. Toyota used two different nuts for the 8" Applications this will replace the one that uses the 30mm socket to remove. This is a fine thread nut.
NOTE: Will not work for the front 7.5" or any other Toyota differential.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-575-2174.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|