Premium Master Rebuild Kit

Toyotas are known for their longevity, so it is no surprise to see engines with 200,000 plus miles on them. Unfortunately, they will need some attention eventually, and that is precisely where LC Engineering's Master Rebuild Kit comes in. With all the components you need to go through that tired factory turbo engine and give it a fresh start. This Turbo Master Rebuild Kit comes standard with Street Performer Hyper Pistons, piston rings, wrist pins, wrist pin locks, main, rod & thrust bearings, complete gasket kit, timing chain kit, new water pump, LC Engineering Pro Oil Pump, rod bushings and freeze plugs. Perfect for getting that factory turbo engine in good health, or build a low compression engine for your new low boost turbo build. If you are looking to build a turbo engine for over 10psi, upgrade to our Forged Pistons, or consider our Pro Short Block Kit. This will provide the strength needed for those high boost builds!

Kit Includes:

• Street Performer Hyper-Turbo Pistons
• Piston Rings, Wristpins & Wristpin Locks
• Main, Rod & Thrust Bearings
• Complete Gasket Kit
• Timing Chain Kit w/ Metal Backed Guides
• New Water Pump
• LCE Pro Oil Pump
• Freeze Plugs

LC Engineering recommends using this with our Crank Scraper Part# 1013022.

NOTE: For turbo engines only. The gasket kit will not include any turbo gaskets however, please see Part #: 1024053 for the OE turbo gaskets. All 1985 and newer engines use silicone seal oil pans no gasket will be included in the kit. We do exchange UNOPENED parts; All boxes are marked on the outside. You should verify the sizes needed before opening the boxes. Before doing any boring on the block, your machine shop should have the pistons in hand at the machine shop. We do not accept returns of any Standard sized pistons.

Contact our Tech Support Line for further information at 928-575-2174.