ReadyLIFT Leveling Kit

(+2.25" Lift)

ReadyLIFT leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed! This strut extension provides 2.25" of lift which gives clearance to add up to 32" wheels and tires to the 2005-2013 Toyota Tacoma 2wd & 4wd and PreRunner. 33" tires can be used with some minor trimming of the inner fender panel.

NOTE: 2011-2013 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2013 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber. 2013 Tacoma TRD models require purchase of Sway Bar Relocation bracket.

Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLIFT can be installed one to two hours and costs less than the price of a single custom wheel. ReadyLIFT Lifetime Warranty Included! All ReadyLIFT products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.

NOTE: It is ReadyLift's position that our objective is to provide a product that levels the vehicle. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0" difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0" of rake compared to a Non-TRD truck. Measurements on some customer's trucks have revealed as much as 1.0" difference in the factory front end height.

If you measure the truck at stock height, then install a 3" strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that have less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0" 2044009 rear block kits to achieve a slight rake to a level stance.

Features:

• Keeps your factory ride - Guaranteed
• Will never wear, break or fail - Guaranteed
• Toughest finish – Guaranteed
• The safest way to level lift - Guaranteed

ReadyLift Top Mount Strut Extension

• Safely installs without compressing struts
• Fixed Lift
• 10.9 rated mounting studs
• Powder-coated - Solid steel construction
• Made from 7mm plate steel (over 1/4" thick)

NOTES: 33" Tires will only work using an OEM wheel or OEM wheel-equivalent backspaced wheel. Some minor trimming may be required. Some applications may require 1" rear block kit, see Part #: 2044009.

Contact our Tech Support Line for further information at 928-575-2174.