Dual Transfer Case Crossmember

Our Rock Defenseâ„¢ Tacoma Single and Dual T-Case Crossmembers fit 95-04 single t-case or dual t-cases, automatic and manual transmissions, and uses your stock t-case mount(s). The Rock Defenseâ„¢ Tacoma Single and Dual T-Case Crossmembers are made from 3/8" thick 1010 steel so you have confidence that your t-case is supported and covered when you are sliding over even the nastiest rocks. Our Rock Defense Tacoma Single and Dual T-Case Crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases. You simply bolt the dual case crossmember into the same bracket, all that is needed is an additional t-case mount. Supplied mounting brackets are 1/4" thick 1010 steel and all necessary grade 8 mounting hardware is included with top locking nuts.

NOTE: This crossmember is required when installing our Solid Axle Swap Lift Kit. Crossmembers are shipped unpainted, and should be painted or powder coated before being installed.

This product should not be used in a manner that violates Federal EPA Laws.

Contact our Tech Support Line for further information at 928-575-2174.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!