Rod Bearing Set
(Standard)
Clevite 77 bearings are the ones to use in your high-performance engine because of their tri-metal construction, soft lead-alloy outer layer, copper-lead center, and steel backing. Clevite bearings withstand the friction, dirt, misalignment, wear, corrosion and heat that chew away bearing and journal life.
Toyota Journal VS Pro Journal
Tech Note
|
ROD BEARING SIZE
|
CRANKSHAFT JOURNAL RANGE
|
|
Standard Bearing
|
2.0861 in - 2.0866 in
52.988 mm - 53.000 mm
|
|
.25 mm (+.010")
|
2.0761 in - 2.0766 in
52.738 mm - 52.750 mm
|
|
.50 mm (+.020")
|
2.0664 in - 2.0669 in
52.488 mm - 52.500 mm
|
|
.75 mm (+.030")
|
2.0566 in - 2.0570 in
52.238 mm - 52.250 mm
|
|
1.00 mm (+.040")
|
2.0467 in – 2.0472 in
51.988 mm – 52.000 mm
|
|
ROD BEARING OIL CLEARANCE
|
|
20R
|
0.0012 in - 0.0028 in
0.030 mm - 0.071 mm
|
|
22R/RE
|
0.0012 in - 0.0028 in
0.030 mm - 0.071 mm
|
|
RACE OR HIGH PERFORMANCE / TURBO
|
0.0020 in – 0.0030 in
0.050 mm - 0.076 mm
|
|
OIL CLEARANCE NOT TO EXCEED 0.0040 in (0.101 mm)
|
When measuring to get your bearing sizes, make sure you’re using a micrometer. It is your responsibility to provide the correct measurement to order the correct size bearing as these are non-returnable.
NOTE: No returns accepted for Standard size bearings, make sure your crank is within spec before ordering.
Contact our Tech Support Line for further information at 928-575-2174.
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
Great service 
