When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready for the miles to come. The majority of Safety Bearings are produced by the Japanese factories that manufacture original engine bearings found in modern import engines like Toyota's. This ensures the performance and durability of our bearings to meet the demands of even the most stressful engines. We at LC Engineering offer main bearings, rod bearings, thrust washers, and pin bushings to serve all your engine bearing needs.
Why Safety Bearings?
Safety Auto Parts Corp. is dedicated to ensuring that their bearings are of the highest quality available in the aftermarket. Just as the factories have strict standards of quality for the OE engines bearings they produce, Safety enforces similar standards of quality to provide our customers with bearings that are as close to OE as possible. Many of our competitors offer cheaper solutions at the cost of lower quality products. At LC Engineering, we strive to provide the highest quality possible and also offer it at affordable prices. Try our products, and the difference will be immediately noticeable.
ROD BEARING SIZE
CRANKSHAFT JOURNAL RANGE
Standard Bearing
52.988 mm - 53.000 mm 2.0861 inches - 2.0866 inches
.25
52.701 mm - 52.711 mm 2.0748 inches - 2.0752 inches
.50
52.414 mm - 52.422 mm 2.0635 inches - 2.0638 inches
.75
52.127 mm - 52.133 mm 2.0522 inches - 2.0524 inches
NOTE: When measuring to get your bearing sizes, make sure that you use a micrometer, It is your responsibility to provide the correct measurement to order the correct size bearing, as these are non-returnable. No returns accepted for Standard size bearings, make sure your crank is within spec before ordering.
Contact our Tech Support Line for further information at 928-575-2174.