Sidedraft Throttle Body Kit

(40mm / 20R Head)

Imagine having the awesome looks of sidedraft carburetors with the reliability and economy of fuel injection. LC Engineering has put together a Sidedraft throttle body kit with all the goodies you will need to make this install a simple bolt-on. The kit comes complete with 40mm or 45mm Borla sidedraft throttle bodies, Intake for 20R or 22R Toyota motors, fuel rail, stacks, TPS and air filters. This is the kit you need to give your Toyota motor crisp and clear throttle response!!! With no limits and ease of tune via a stand alone fuel management system, you can achieve your horsepower goals. (Injectors and management are not included. Please call for injector sizing and fuel management recommendations.)

These sidedraft throttle bodies are a direct replacement for Dellorto DHLA, Mikuni PHH, SK Racing, Solex ADDHE, and Weber DCO and DCOE carburetors. 40, 42, and 45mm units will fit at center-to-center dimensions as low as 83mm provided the shafts are trimmed. 48 and 50mm units cannot be installed where the center-to-center dimension is less than 90mm without some special engineering. Injectors to be used in these throttle bodies are Bosch, Lucas or Rochester with 14mm O-rings at both ends.

NOTE: Some Siemens injectors are too short. A fuel rail kit, adjustable for different manifold layouts, attaches to integral mounting points. Will come with an adapter to hook up your factory throttle linkage. Injectors are not included. Please call for injector sizing and fuel management recommendations.

Contact our Tech Support Line for further information at 928-575-2174.