LC Engineering has taken the guesswork out of your 2TR top end by offering this ready to install kit. These kits will supply you with all the compatible parts to upgrade the valve train on your performance engine. This kit is a perfect upgrade for use with stock cams.
Intake & Exhaust Valves
These stainless steel (stock size) valves are given a special anti-friction coating to promote better airflow and minimize resistance in the valve guide. High performance (21-4N) high-grade steel with a black Nitride coating for less friction and longer life.
Street Valve Springs
The springs we’ve included in this kit offer a higher spring pressure, allowing your engine to reach higher RPM’s by reducing valve float. These valve springs are an excellent choice for a mildly built engine (naturally aspirated or low boost 0-10lbs). The spring specs are approximately 70lbs of seat pressure at 1.420" install height and about 130lbs at .400" lift with coil bind occurring at .550" from the installed height.
Viton Valve Seals
Viton valve seals are the latest technology in valve seal material, providing heat resistance to 440 degrees Fahrenheit (266 C). While reducing oil consumption through the valve guide, these seals provide a better oil seal and are longer lasting than stock.
NOTE: You will reuse your stock Toyota retainers, locks and spring seats with this kit since there are no upgrade benefits over the stock parts.
Contact our Tech Support Line for further information at 928-575-2174.