3-Link Rear Suspension Kit

Trail-Gear is now offering a 3-Link suspension kit for the rear of your 1995.5-2004 Tacoma. Every Tacoma component in this kit has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With our full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install this kit in one or two weekends.

The Tacoma 3-Link Rear Suspension Kit consists of a 3 link system plus a panhard rod to locate the axle. This system allows the use of the stock fuel tank. Links are made from super heavy duty 2" DOM with a wall thickness of 1/4". Extra large 1.25" Creeper Joints are used for the link ends. This kit with long travel shocks allows for more than 30" of rear axle articulation.

Kit Includes:

• (2) 40", 2"OD X .250" wall DOM links
• (2) 30", 2"OD X .250" wall DOM links
• (8) 1.25" Creeper Joints
• (8) Rod end jam nuts
• (8) threaded link end bungs
• (1) Upper link frame mount
• (2) Lower link frame mounts
• (8) Lower link frame gussets
• (1) Panhard frame mount
• (1) Panhard/upper link axle mount w/ 2 gussets
• (2) Frame support tubes
• (8) 9/16" X 4" link end bolts and lock washers
• (2) Tacoma rear frame box plates and tubes
• (1) Panhard reinforcement tube

NOTE: Kit does not include rear wheel spacers, shocks or upper shock mounts. Recommended shocks, 16" Fox 2.0 Air shocks. Kit weighs 140 lbs.

This product should not be used in a manner that violates Federal EPA Laws.

Contact our Tech Support Line for further information at 928-575-2174.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!