Chevy Transmission Adapter Plate Kit
(5º Offset)
LC Engineering's custom transmission adapter kit is designed to mate a Toyota 2RZ/3RZ Tacoma engine to any GM Turbo-Hydromatic (350 or 400), 700R or Powerglide transmission bell housing. Perfect for the racer that wants the easy-to-find GM transmission in their race truck and wants the power and reliability of their Toyota engine. This adapter plate includes all hardware needed for the installation of the adapter plate to the block as well as the transmission bell housing to the adapter plate. This conversion will require a custom torque converter to bolt to the stock Toyota flexplate or a custom flexplate with the converter bolt pattern.
It is designed to be on the stock 5° angle that engines on Tacomas have. This transmission adapter plate is approx. 3/8" thick.
NOTE: Does not work with Manual Transmissions.
Contact our Tech Support Line for further information at 928-575-2174.
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
To open a printable PDF version of this instruction
CLICK HERE
Installation:
When running an automatic transmission with LC Engineering’s adapter plate you will need to have a custom torque converter made to bolt to the flexplate. Please make sure that the new torque converter is supported properly into the rear of the crank to properly support the weight.
