(F9) Idle Jet Kit

This kit is used to make the air/fuel mixture richer. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean fuel condition are: needing to adjust the idle too high, rough idle, hesitation or stumble on acceleration, a flat spot at around 2500 RPM and/or surging at a constant RPM in higher gears.

Along with leaner fuels, any modifications to an engine to improve performance can compound the lean effect and require more mixed fuel volume. Modifications could be as simple as an opened or larger air filter, an open exhaust system, or ignition modifications. Some modifications could be as extensive as a larger camshaft, head modifications, headers, or increased engine displacement. Also, altitude & extreme temperature or humidity affects the air to fuel ratio. Any and all of these modifications are exaggerated when combined with the lean fuel.

Weber recognizes your need to have a variety of jets for all circuits available when tuning your engine. These jet kits come with simple tuning instructions and a variety of jets to cover the stock and modified engine and are designed using years of experience jetting carburetors on engines all over the country with all types of modifications. If you are experiencing any of these symptoms from your Weber carburetor or simply want to improve the quality and performance from your engine, these kits are for you.

These jet kits contain mains and air jet ranges developed around traditional calibrations, based on Venturi and engine displacements. Kits should provide a range of calibration flexibility to help tune most applications.

Kit Includes:

• (4 Each) Idle Jets 74822- .055, .060, .065, .070
• (2) Zero Pump Bypass 79701.000

NOTE: Jets and kits are non-returnable items!

Contact our Tech Support Line for further information at 928-575-2174.